Today, we discuss some effective ways you can fix a broken floor tile. A broken floor tile looks really ugly, and more often than not, you have the heart to change the flooring altogether. That’s not a wise thing to do. Follow the steps given below to efficiently take care of the broken tile, and make your house spotlessly clear as ever –

1. Paint over the crack

If your tile has a hairline crack, you can easily take care of it by painting that area in the same color as its base. Of course, this method does not fix the crack per se, hence it is best applicable to really minor hairline cracks. Make sure you use a tile filler and paint mix in order to not let the crack extend in the future.

2. Apply glaze over the area

One of the best methods to fill the crack efficiently and debar it from extending further. For this, you would have to start by sweeping and mopping the floor efficiently. Make sure there is no trace of dirt for if you glaze on any piece of dirt, it will forever remain engraved in the tile. Wait till the tile gets dry before you start applying the glaze. Make sure you glaze all the other tiles in order to match the repaired one. You may also combine the first point with this one to get maximum benefit. This process may look tad bit of an investment, but it is far better than changing the entire flooring.

3. Use epoxy in the cracked bit

A strong-holding epoxy specifically created to hold together stones and other porous materials is great for repairing tiles. For this, you would need a two-part epoxy (two products that should be mixed together to activate), which would serve as the tile-filling glue. This method is also fairly simple but works wonders for even larger and visible cracks alongside the hairline cracks. For the entire DIY using epoxy, please visit here.

4. Replace the tile

If you feel the crack is too large and has literally shattered your entire tile, replacing it with a new one might be the only option left. However, before plucking out the tile, make sure you find the same design tile somewhere. Going about the process, you need to break the tiles into small pieces using a hammer. Thereafter, chisel out the broken fragments. Do scrape away the adhesive underneath with a putty knife and clean that area efficiently to get a flat surface to fix on a new tile. Although you can do this process yourself, a helping hand may be wonderful.

The post How to Fix Broken Floor Tile appeared first on Pep Up Home.

1. Clean the sink spotlessly

The first and most important step is to clean & Repair your Bathroom Sink efficiently. Not only residue but the sink must be cleared of any dirt or grime. After you clean the drain, you must take a sponge and soap to clean the surface as well. After you are done scrubbing and washing, dry the sink with a towel and let it air dry for some time.

2. Sand the damaged area

After you are done air-drying the complete sink, time is now to lightly sand the disturbed area. This step should be done using a 400-grit to 600-grit fine sandpaper. While you are doing it, make sure to roughen up the chip edges in order to let the patching material or touch-up paint adhere efficiently. Also, care should be taken not to scratch the plain and unblemished areas of the sink’s surface while sanding the affected area.

3. Repair compound is next to be applied

After you are done sanding the area, it is now time to use a porcelain filler or repair compound to fill in the deep gouges and chips. This step should be done if your sink has more than just a fine hair crack. For this step, you can use a small brush or spatula to fill the chip or gauge with the filler in layers till it has been filled in to just above the sink’s surface. Make sure to give each application enough time to dry before proceeding with the next. To match the repair level with the rest of the surface, ever-so-lightly sand the area after each application. You can follow the manufacturer’s instructions on application and drying time. After you are done with applying the filler, let it set completely.

Alternatively, a repair epoxy can also be used to fill in the chipped area. A number of solutions available in the market should be seen in order to match the color with the existing color of the sink. These kits usually come with two epoxy components along with a small brush to apply the compound with.

4. Apply porcelain or ceramic touch-up paint

The last step requires you to apply porcelaintouch-up paint over the filled-in area. The touch-up paint comes in myriad hues so try to match it perfectly with the sink’s finish. The touch-up paints are waterproof and form a tight seal over the recently-applied filler.

If your sink has a hair crack, you can avoid Step 3 and straightway jump to Step 4.

The post Crack In Your Bathroom Sink? Here’s How You Can Repair It Yourself appeared first on Pep Up Home.